BLUETTI Charger 1 combo | 560W Alternator Charger including 5 meters cable

BLUETTI Charger 1 combo | 560W Alternator Charger including 5 meters cable

The BLUETTI Charger 1 combo turns your vehicle's alternator into a fast charging source for your portable power station, built for anyone who spends long stretches away from mains power: hunters on remote blocks, graziers checking paddocks, and 4WD travellers running fridges and camp gear off-grid. This combo pairs the Charger 1 DC-DC unit with the 5 metre, 6AWG input cable, so you have everything needed to wire it straight to your vehicle's starter battery.

Fast On-Road Charging: The BLUETTI Alternator Charger 1 delivers up to 560W—6× faster than traditional car chargers, fully charging a 1kWh power station in just 2.5 hours on the go. That means a run into town or a day driving between paddocks does the work a cigarette lighter socket would take hours longer to finish, since a standard 12V or 24V vehicle cigarette lighter typically only delivers 100W to 200W .

Wide Power Station Compatibility: The Charger 1 offers a default voltage of 27V, with a voltage range of 15.0V to 56.0V on a 12V battery and 27.0V to 56.0V on a 24V battery, both adjustable via the app. This adjustable output means the same unit works across all BLUETTI power stations and 95% of other models on the market , so you are not locked into one brand of battery bank as your setup grows.

Multi-Layer Protection Every Trip: The Charger 1 is built with short circuit, anti-reverse, under-voltage and over-temperature protection, cooled by an active fan and rated to an IP20 protection grade. It also watches your starter battery for you: the unit auto-monitors the car battery and stops drawing power within 3-6 seconds when the engine is off , so you can charge on the drive without risking a flat battery back at camp.

Monitor and Adjust from Your Phone: The Charger 1 pairs with the BLUETTI app over Bluetooth, letting you check the charging status, adjust the voltage directly from your phone, and ensure everything is running smoothly while you are behind the wheel. It is a handy check before a long drive to confirm the unit is set to the right output voltage for the power station on board.

Heavy-Duty 5 Metre Cable Included: This combo comes with the 5 metre DC input cable built with heavy duty 6 AWG wiring and an integrated 60 amp circuit breaker, designed to connect your vehicle's battery system to the Charger 1 for safe, efficient power transfer on the move . The extra cable length gives you room to mount the charger away from the engine bay heat and still reach the starter battery, whether it sits under the bonnet, behind a seat or in a canopy setup.

What's Included

• BLUETTI Charger 1 DC-DC Charger
• DC Input Cable (5m, 6AWG, with 60A circuit breaker)
• MC4 Output Cable
• 4 x Hex Socket Screws
• 6 x Self-tapping Screws
• 1 x Hex Socket Wrench
• 4 x OT Terminal
• 2 x Tube Terminal (red, positive)
• 2 x Tube Terminal (black, negative)
• Product Documentation